The £9,000 Heat Pump Grant Won’t Fix Your Radiators

A £9,000 heating grant just landed for rural homes. It won’t fix the radiator problem waiting behind it

Rural England got some good financial news this summer. Since 21 July, homeowners who heat their homes with oil or LPG have been able to claim £9,000 towards a heat pump, up from £7,500, through the government’s Boiler Upgrade Scheme. Government figures published in late August show it’s working: heat pump applications hit a record high in July, with more than 8,000 households applying in a single month, well above anything seen since the scheme launched.

It’s a meaningful sum, and it’s aimed at the households you’d expect. Those too far from the gas network to have ever had a choice. Leaflets went out to 200,000 eligible homes in June to explain the change. In practice, that’s a lot of farmhouses, rectories, converted barns and old villas. These are places where oil was always the only option. Nothing else reached that far down the lane.

I’m writing about this because of a job I did recently for a customer in a rural part of Cornwall. His old oil central heating boiler was in the middle of being replaced with air source heating, and we got talking about the scheme and what made him decide to switch. For him, it came down to two things. The grant was noticeably higher than it had been, and switching meant he would no longer need to top up an expensive tank of oil every 8 to 12 months. Conversations like that are why I wanted to look at what happens next for homes like his.

Air source heat pump installed beside a rural stone house in the countryside.

What the announcement doesn’t mention is what happens to the radiators.

The Bit Left Out of the Leaflet

Heat pumps don’t heat water as hot as a boiler does. A boiler typically sends water round the system at 65 to 75°C. A heat pump runs most efficiently at 40 to 55°C. That’s good for running costs. But it means each radiator has less heat to give off than before.

The result is simple. A radiator sized for a boiler is often too small once a heat pump goes in. One fix is to push the flow temperature back up. But that eats into the savings the grant was meant to unlock. The other fix is bigger radiators. Often both happen.

In a new-build with plastered stud walls, that’s just a fitting job. In an old farmhouse with a stone wall two feet thick, it’s a bigger conversation. Bigger radiators can mean visibly bigger radiators. In a room with cornicing, panelling or an old fireplace, that matters.

Why Period Homes Feel this the Most

Solid-wall, off-grid homes were already the hardest heat pump job. They lose heat faster than a modern house does. That pushes up the radiator size needed on its own. The lower flow temperature makes it worse still.

Homeowners here now face three jobs that used to be one. There’s the heat pump, which the grant helps with. There’s the insulation and pipework, which heritage rules may or may not allow. And there’s the radiators. Nobody mentions those, because they’re not the bit that gets subsidised.

Heat pump installation infographic showing three parts of a home upgrade: the heat pump, insulation and pipework, and radiator upgrades.

Historic England’s own guidance on installing heat pumps in historic buildings says as much directly. Radiators may need to be supplemented or replaced with larger versions to work at a heat pump’s lower flow temperature. It’s an official acknowledgement that the radiator question isn’t an afterthought, it’s part of the job. Get that order wrong, and a simple switch to electric can turn into months of back and forth with a conservation officer over a radiator that’s larger than the one it replaced.

An Older Answer to a New Problem

There’s a material that period homeowners have already been turning to for exactly this kind of problem. Cast iron. It won’t make radiators smaller, but it changes how the trade-off feels.

Cast iron isn’t the only fix, and it isn’t a way to dodge the sizing problem altogether. Any radiator (cast iron or steel) has to be sized for the heat pump’s lower flow temperature or it won’t keep the room warm. Paladin’s own guidance is candid about this: cast iron radiators for heat pump systems typically need to be sized larger than the steel equivalent, often by one or two extra sections per radiator. What cast iron does offer in return is thermal mass. It holds far more heat per section than a steel panel, and releases it slowly, so the radiator keeps giving off warmth well after the heating cycle ends. That suits how a heat pump likes to run. Long, gentle bursts rather than short, hot blasts. It’s a trade-off rather than a free win. A bigger radiator, but one that matches the room better once it’s running.

Paladin Radiators is one example. Paladin has built cast iron radiators for more than two decades. Whatever the heating source, the same rule applies. The section count has to match the flow temperature and the room’s heat loss, or the radiator won’t keep up.

Air source heat pump with steel and traditional cast iron radiators, illustrating cast iron as an alternative for heating period homes.

Paladin’s radiators are put together and finished at its Lincolnshire factory. The casting itself happens at a separate foundry, one that works only for the brand. There are 18 period-style designs to choose from. Paint colours can be matched too, through partnerships with Farrow & Ball and Little Greene. So a radiator sized right for a heat pump doesn’t have to look out of place in a period room.

The company also points customers to a free online BTU calculator before they buy anything. Sizing is the part that goes wrong most often, whether the room’s fed by a boiler or a heat pump, and it’s easier to get the section count right before ordering than to add a radiator later.

What to Ask Before Claiming the Grant

Anyone drawn in by the new £9,000 figure should get a heat loss survey done first. And a radiator check too. Do this before the heat pump goes on the wall, not after. The grant pays for the heat pump. It doesn’t pay for the radiators that make it work well. So nothing forces buyers to sort that part out early.

For a listed building, or a conservation area, that survey matters even more. Planning consent for a heat pump can take months on its own. Finding out halfway through that every radiator needs swapping, and in a bigger size than before, is a delay nobody plans for.

The grant makes the switch cheaper. It doesn’t make the radiator question go away. For Britain’s older, oil-heated homes, that conversation is only just getting started.

If you’re planning other work on an older home in Newquay or the surrounding area, get in touch through handymanben.com and we can talk through the practical side.


Discover more from HandymanBen

Subscribe to get the latest posts sent to your email.

Leave a Comment